TUTDoR

Abdulwahab, M.

Showing items 1 - 15 of 19.

Add to Quick Collection   All 19 Results

Sort:
 Add All Items to Quick Collection
Date: 2016/11/07
Language: en
Type: Text
Identifier: tut:3189
Description: Our present investigation focuses on the thermal stability of already developed electroforms of ZnANi and ZnANiAAl2O3 thin films induced with triethylamine (TEA) and monoethylamine (MEA) as surfactant ... More
Full Text: Full Text
Date: 2015/11/27
Language: en
Type: Text
Identifier: tut:4921
Description: In order to use minimum time and save energy during siliconizing surface hardening of low carbon steel it is important to study the siliconizing parameters to obtain optimum conditions. In this work, ... More
Full Text: Full Text
Date: 2015/10/27
Language: en
Type: Text
Identifier: tut:5004
Description: Surface enhancement of engineering materials is necessary for preventing service failure and corrosion attacks industrially. The surface modification, strengthening effect and electrochemical comparat ... More
Full Text: Full Text
Date: 2015/09/09
Language: en
Type: Text
Identifier: tut:4922
Description: Abstract Zinc–nickel films were obtained by elec- trocodeposition using electrolytic deposition techniques in the presence of TEOA (C6H15NO3) and a surfactants consisting of triethylamine and monoethy ... More
Full Text: Full Text
Date: 2014/02/15
Language: en
Type: Text
Identifier: tut:5619
Description: The effect of applied load on the wear behaviour of polymer matrix composites produced using carbonized bone particles (CBp) as reinforcement has been studied. The addition of the CBp ranges from 5 to ... More
Full Text: Full Text
Date: 2013/09/03
Language: en
Type: Text
Identifier: tut:5618
Description: The present study was aimed to develop a multilayer-modified coating that will enhance the surface characteristics of mild steel against chemical and mechanical deterioration with a ternary Zn-Ni-Al2O ... More
Full Text: Full Text
Date: 2013/07/04
Language: en
Type: Text
Identifier: tut:4924
Description: The corrosion inhibition of thermally pre-aged Aluminium-Silicon-Magnesium (Al-Si-Mg) alloy in 3.5 % NaCl solution with natural Avogadro oil of varying con- centrations has been studied using linear p ... More
Full Text: Full Text
Date: 2013/01/02
Language: en
Type: Text
Identifier: tut:5640
Description: The corrosion and hardness characteristics of laser cladded Ti6Al4V alloy with and without coaxial nozzle with respect to variable laser power was investigated. The electrochemical behaviour of pure T ... More
Full Text: Full Text
Date: 2012/10/29
Language: en
Type: Text
Identifier: tut:5644
Description: The assessment of Ricinus communis as corrosion inhibitor for aluminium alloy in 2M HCl and H3PO4 acid solution using gravimetric and potentiodynamic polarization techniques was investigated at 298K. ... More
Full Text: Full Text
Date: 2012/09/22
Language: en
Type: Text
Identifier: tut:5638
Description: Titanium metal matrix composite (MMCs) was developed on titanium alloy (Ti–6Al–4V) substrate with the aim of improving the hardness and wear properties by laser cladding technique using a Rofin Sinar ... More
Full Text: Full Text
Date: 2012/.09/04
Language: en
Type: Text
Identifier: tut:5629
Description: The effects of uncarbonized (fresh) and carbonized bone particles on the microstructure and properties of polypropylene composites have been studied. The addition of the bone particles ranges from 5 t ... More
Full Text: Full Text
Date: 2012/08/30
Language: en
Type: Text
Identifier: tut:5639
Description: The effect of Cyperus esculentus L. oil as a corrosion inhibitor on the corrosion rate of A356.0-type Al-Si-Mg alloy in simulated seawater environment was investigated using gravimetric method. The co ... More
Full Text: Full Text
Date: 2012/08/28
Language: en
Type: Text
Identifier: tut:5637
Description: Studies have been made on the mechanical properties upon thermal ageing of a sand cast antimony-modified A356-type Al-Si-Mg alloy. The produced alloy was solution heat treated at 540oC/1 h then subjec ... More
Full Text: Full Text
Date: 2012/07/30
Language: en
Type: Text
Identifier: tut:5620
Description: The corrosion assessment of mild steel in H2SO4-Arachis hypogeae natural oils have been studied using electrochemical technique. The surface morphology of as-corroded samples was assessed with scannin ... More
Full Text: Full Text
Date: 2012-07-05
Subject: Laser | Aluminum
Type: Text
Identifier: tut:1953
Description: Laser surface alloying (LSA) of aluminum AA1200 was accomplished with a 4.4 kW Rofin Sinar Nd:YAG laser. Alloying was carried out by depositing molybdenum metallic powder on the aluminum substrate. Th ... More
Full Text: Full Text