Description:
UNS G10150 steel was electrodeposited with Zn-30Al-7%Ti, in the presence of solanum tuberosum, under sulphate condition, via dual anode route. The microstructures of the deposited layers were examined
... More
Description:
The effects of different combinations of spark plasma sintering parameters: temperature, pressure, heating rate and holding time, at three levels on the microstructure, densication, mechanical and w
... More
Description:
Mechanical properties of grade 1 commercially pure titanium (CP–Ti) are characterized by a good combination of strength and ductility at elevated temperatures. CP-Ti mechanical properties at room and
... More
Description:
Failure of aerospace components from extreme operating temperatures due to oxidation in components such as turbine blades and compressor blades results in catastrophic consequences, which mostly lead
... More
Description:
Inconel 738 low carbon is a nickel-based superalloy that is widely used in the marine and petroleum industries, where it is subjected to an aggressive erosive and/or corrosive environment. Degradation
... More
Description:
Equi-atomic Ti-Al-Mo-Si-Ni high entropy alloys (HEAs) with outstanding wear and oxidation properties is fabricated by means of Spark plasma sintering (SPS) technology. The influence of sintering tempe
... More
Description:
Researches of mild steel coatings are relatively continuous due to the need to obtain optimum properties for its utilization in different environments. Zn-Ni-CeO2-Y2O3 alloy composite development show
... More
Description:
In this study, the effect of the incorporation of composite and eco-friendly particles to develop new engineering materials on the developed zinc electrolyte containing TiO2/TiB and Solanum tuberosum
... More
Description:
Ti−6Al−4V/TiN composites were successfully consolidated by spark plasma sintering (SPS). TiN addition to Ti−6Al−4V was varied from 1% to 5% (volume fraction). The effect of TiN addition on the densifi
... More
Description:
Over the years, engineering materials are being developed due to the need for better service performance. Wear, a common phenomenon in applications requiring surface interaction, leads to catastrophic
... More
Description:
Nano-sized particle incorporation into metal matrix has gained worldwide acceptance. Al2O3, Cr2O3, and SiO2 nanoparticles have been co-deposited with Zn using electrodeposition process to produce adva
... More
Description:
In order to use minimum time and save energy during siliconizing surface hardening of low carbon steel it is important to study the siliconizing parameters to obtain optimum conditions. In this work,
... More
Description:
The relationship between microstructure and wear behavior of Ti6Al4V alloy and three laser-clad composite coatings (TiNi, TiNi5ZrO2, and TiNi10ZrO2) was investigated. Dry sliding wear tests were carri
... More
Description:
The influence of cobalt based and zirconia mixed binder additives on the mechanical properties and tribological characteristics of WC based spark plasma sintered cermet composites was investigated. Va
... More
Description:
Aluminium is one of the common elements that has attracted researcher all over the world because of the light weight to strength, but the hardness values and wear resistance is low which limited usage
... More