Fayomi, O.S.I.Kanyane, L.R.Popoola, A.P.I.Oyedepo, S.O.2024-11-152024-11-152018-07-092214-9147https://doi.org/10.1016/j.dt.2018.07.002https://hdl.handle.net/20.500.14519/1062Despite the massive usages of low carbon steel in automobile for engineering components, its corrosion and high friction coefficient in aggressive environment make it limited in service. This paper is aimed at modifying low carbon steel structural component with thin film composite for enhanced mechanical and corrosion properties. The steel structure was electrodeposited with Zn-V2O5 and embedded with varied NbO2 weight concentration of 6e12 wt % based electrolyte. Scanning electron microscope (SEM) and high optical microscope was used to study the microstructural evolution of the fabricated coatings. The thermal stability of the fabricated coatings was studied in an isothermal furnace at 300 C and 600 C and further characterized using a high-tech optical microscope. Potentiodynamic polarization technique was used to investigate the corrosion behavior of the composites in 3.65% NaCl. From the result, the effect of NbO2 on Zn-V2O5-NbO2 was massive with improved crystal grain within the coatings lattices. The coating possesses strong metallurgical bonding and good corrosion resistance properties of about 0.315 mm/yr corrosion rate compare to 4.1 mm/yr of as-received sample. No doubt the impact of thermal shock on the resilient characteristics of the composite coating was moderate owing to the stable adherent properties of the deposited coatings.446-450 PagesenAttribution-NonCommercial-ShareAlike 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-sa/4.0/ElectrodepositionLow carbon steelMicro-hardnessThermal stability corrosion behaviorRare earth metal (REM)Article