Investigating the surface roughness of hardened tool steel (2379) during face milling operation.
Phokobye, Solomon Desai, Dawood Tlhabadira, Isaac Sadiku, Rotimi Daniyan, Ilesanmi
Phokobye, Solomon
Desai, Dawood
Tlhabadira, Isaac
Sadiku, Rotimi
Daniyan, Ilesanmi
Citations
Altmetric:
Abstract
The quality of a product is partly a function of its surface finish. This work considers the investigation of the surface roughness of a hardened tool steel during face milling operation. The design of experiment was carried out using the Taguchi approach and this was validated via physical experimentations. The physical experiments were carried out on Deckel Maho milling machine using a SANDVIK indexable cutting tool (R390-11 T3 08M-PM 1010) on a 2379 tool steel for press tools. The process parameters considered were the cutting speed, feed per tooth and depth of cut under different cutting conditions, which includes air-cooling and soluble oil cooling. The results obtained indicate that cutting operations under soluble oil cooling condition gave a better surface finish as compared to the cutting operations under air-cooling. The optimum combination of the process parameters, which produced the least surface roughness under the air cooling and soluble oil cooling conditions, are: cutting speed (125 m/min), feed per tooth (0.08 mm) and depth of cut (0.5 mm). It is envisaged that this study will assist machinists in the process design of machining operations for the development of products with good surface integrity.
Description
Date
2021-09-01
Journal Title
Journal ISSN
Volume Title
Publisher
Engineering and Technology Publishing
Research Projects
Organizational Units
Journal Issue
Keywords
Surface roughness, Surface finish, Cutting operation, Tool steel